(0)
- Selectable “impuls” mode for removal of stubborn screws and for spot-drilling on smooth surfaces
- Robust die cast aluminium gear housing for optimum heat dissipation and durability
- Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws
- Vario -Tacho-Conatmatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
- Thumbwheel for speed preselection
- Two-speed gearbox
- Metabo Marathon motor with patented dust protection for long service life
- Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
- Forward and reverse rotation
- Spindle with hexagonal recess for screwdriver bits for working without chuck
- Overload protection: protects the motor from overheating
- Restart protection: prevents unintentional start-up after power supply interruption
- Handle with non-slip soft-grip surface
- Cable-protecting ball joint for optional freedom of motion when working
- Wear indicator for Carbon Brush
| Model | BEV1300-2 |
| Rated input power | 1300 W |
| Output power | 730 W |
| Drill-∅steel | 16/10 mm | 5/8 / 3/8″ |
| Drill- soft wood | 40/25 mm | 1 9 /16 / 1″ |
| No-load speed | 0 – 1100 / 3100 rpm |
| Speed at rated load | 1100 / 3100 rpm |
| Gears | 2 |
| Maximum torque | 44 / 16 Nm | 390 / 142 in-lbs |
| Collar diameter | 43 mm | 1 11/16″ |
| Chuck capacity | 1.5 – 13mm | 0.059 – 0.0512″ |
| Drill spindle with hexagonal recess | 6.35 mm | 1/4″ |
| Drill spindle thread | 1/2″ – 20″ UNF |
| Weight (without power cable) | 2.7 kg/ 6 lbs |
| Cable length | 4 m / 13 ft |
