(0)
- Metal bevelling tool for chamfer heights up to 10 mm for weld seam preparation
- One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
- Precise setting of the chamfer angle directly via the guide plates
- Universal milling head with three carbide indexable inserts for all chamfer angles from 0-90°
- Controlled working by virtue of large-scale guide plates
- Stop roller to guide along pipes for easy preparation of weld seams
- Bail handle adjusts without tools for secure, even guiding
- Metabo Marathon-motor with patented dust protection for long service life
- Thumbwheel controlled Vario-Constamatic (VC)-Full wave electronics ideal for working on materials requiring customised speeds, and at speeds which remain almost constant under load
- Electronic overload protection, soft start and restart protection
- Protection of the user by virtue of lateral plates for conveying the chips
| Model | KFM 15-10F) |
| No-load speed | 7800 – 12200 rpm |
| Rated input power | 1500 W |
| Output power | 810 W |
| Type of edges | chamfer |
| Max. chamfer width 45 | 14 mm/ 9/16″ |
| Max. chamfer height at 45 | 10 mm/ 3/8″ |
| Grading of cutting depth setting | 0.1 mm/ 0.00394″ |
| Curves smallest outer | 75 mm | 2 15/16″ |
| Weight(without power cable) | 4.9 kg/ 10.8 lbs |
| Cable length | 4m | 157 1/2″ |
| Noise emission | |
| Sound pressure level | 92 dB(A) |
| Sound power level(LwA) | 103 dB(A) |
| Uncertainty of measurement K | 3dB(A) |
- 3 Carbide indexable inserts Universal
- Screwdriver SW 4 with T-handle
- Open-jawed spanner SW 10
- Open-jawed spanner SW 10
- Side handle
- Bow-type handle
- Metal carry case
- Metal carry case
- Stop roller
- Stop roller
- Screwdriver Torx 15
- Screwdriver Torx 15
- Screwdriver SW 4 with T-handle
